| The 1000D's menus are vitually identical to those of
the 450D, giving a good impression of how many of the features of the
more expensive model have been retained. |
|---|
Shooting menu 1
| Option | Values / Actions | Notes |
|---|---|---|
| Quality [Example] | • Large / Fine • Large / Normal • Medium / Fine • Medium / Normal • Small / Fine • Small / Normal • RAW + Large / Fine • RAW |
- 3888 x 2592 JPEG - 3888 x 2592 JPEG - 2816 x 1880 JPEG - 2816 x 1880 JPEG - 1936 x 1288 JPEG - 1936 x 1288 JPEG - 1x .CR2, 1x .JPG - 1x .CR2 |
| Red-eye on/off | • Off • On |
Enables the use of the AF / red-eye lamp just before a flash shot. |
| Beep | • On • Off |
|
| Shoot w/o card | • On • Off |
|
| Review time | • Off • 2 sec • 4 sec • 8 sec • Hold |
If this option is set to Hold then the image is displayed until the shutter release is half-pressed. |
Shooting menu 2
This menu is displayed only in the P, TV, Av, M or A-DEP modes, not in any of the 'Basic Zone' modes (such as full Auto or the Scene modes).| Option | Values / Actions | Notes |
|---|---|---|
| Auto Exposure Bracket | • 0 to +/-2.0 EV in 0.3 EV steps | AE Comp. button and dial configure auto exposure bracketing steps [Clip] |
| Flash exposure compensation | • +2.0 to -2.0 EV in 0.3 EV steps | |
| Custom WB | • Set custom WB | Select image for custom WB |
| WB Shift / BKT | • Shift: B9-A9, M9-G9 • Bracket: BA+/-3, MG+/-3 |
Configures WB shift and WB bracketing. [Example] |
| Color space | • sRGB • Adobe RGB |
|
| Picture Style | • Standard (3, 0, 0, 0) • Portrait (2, 0, 0, 0) • Landscape (4, 0, 0, 0) • Neutral (0, 0, 0, 0) • Faithful (0, 0, 0, 0) • Monochrome (3, 0, N, N) • User Def. 1 • User Def. 2 • User Def. 3 |
Values shown in brackets represent the default setting
for each picture style (Sharpness, Contrast, Saturation, Color tone),
for Monochrome (Sharpness, Contrast, Filter effect, Toning effect). [Example] For Parameter options see table below. |
| Dust delete data | • Cancel • OK |
Allows you to capture an image for dust subtraction later. |
Picture Style parameters
| Parameter | Values | Notes |
|---|---|---|
| Sharpness | • 0 to 7 | |
| Contrast | • -4 to +4 | |
| Saturation | • -4 to +4 | Not monochrome |
| Color tone | • -4 to +4 | Not monochrome |
| Filter effect | • None • Yellow • Orange • Red • Green |
Monochrome only |
| Toning effect | • None • Sepia • Blue • Purple • Green |
Monochrome only |
Play menu
| Option | Values / Actions | Notes |
|---|---|---|
| Protect | Enter protect mode, allows you to browse images either in a single image or thumbnail view and mark each image as protected (or un-protect). This simply sets the read-only flag on the SD card file system. | |
| Rotate | Enter rotate mode, again, this can be performed in either single image or thumbnail index view. This option allows you to rotate an image on-screen by 90 or 270 degrees. Doesn't actually rotate the JPEG file, but marks its orientation. | |
| Erase images | • Select and erase images • All images on card |
|
| Print Order | Allows you to create a DPOF print order file, this defines
which images will be printed, how many copies of each, what format etc.
For use with compatible printers or photo finishers. • Select images • All images • Setup |
|
| Transfer Order | Allows you this select which images will be transferred using compatible computer based transfer software. • Select images • All images |
|
| Histogram | • Brightness • RGB |
|
| Auto Play | Start an automated slideshow of images on the SD card, delay between each image is preset at four seconds. | |
No comments:
Post a Comment
ඔයාලගේ අදහස් ලියල යන එක මට කරන ලොකු උදව්වක්